WindChest : Internals |
Up |
Toe boards Inverted to show magnets and wiring |
Mr. Boo Guarding wind chest shell |
Side view Showing toe board and bottom of chest |
Magnets These are Wicks DirectElectric(TM) magnets; ones in foreground are "bounceless. |
Toe boards Showing magnets and harnesses |
Bounceless This was a reed rank with "bounceless" magnets |
Interior Looking from above |
Stringers Holes are to equalize pressure |
Wind inlet Seen from above |
Interior Showing general layout |
Reed toe board On the chest |
Toe holes at bass end of toeboard |
Octave toe board With lots of dust! |
Octave toe board After cleaning |
Cables Were cut when chest was removed from original organ |
Principal toe board Showing magnets and wiring |
Magnets Copper strips act as current path |
Screws Used for rack boards (left) and bottom boards (right) |
Rack board removed To clean Principal toe board |
Principal toe board Showing wooden rack board pins |